Aquatabs InLine
Aquatabs InLine
Connect the Aquatabs InLine on your main water line: from either a gravity-fed storage tank or on your municipal water line, the InLine disinfects up to 237,000 gallons per one cartridge.
- The kit comes with an Aquatabs InLine housing unit & replaceable cartridge.
- No electricity needed, just incorporate into gravity fed or pressured systems already in use.
- Water is treated as it flows through the system at 2.6 to 7.9 gallons per minute.
- Provides up to 237,000 gallons of clean and safe water per cartridge at a 1PPM dosage level of chlorine.
- Automatic dosing, with the seamless integration and eroding with the flow of water, there is no need to remember the exact dose when working with a large amount of water.
The Aquatabs InLine Water Purification System is an innovative system for disinfecting water at point of entry with no power required and works on the flow of the water. Water is forced down through a cartridge and around the tablets, which dissolve to mix the required level of chlorine into the water line. The tablets are slow dissolving and are therefore perfect for continuous water disinfection.
Assisting in the control of biofilm build up the Aquatabs InLine prevents the re-establishment of the exopolysaccarides (EPS) matrix which is bearing the biofilm. Additionally, it helps with the control of calcium deposits at nipple drinkers and pipes. The Aquatabs InLine also kills microorganisms, like viruses and bacteria, in your water ensuring that Legionella is eliminated.
The Aquatabs InLine is great for the continuous and automatic dosing of water at point of entry into a tank or in-line for gravity, open and or pressurized water systems. You will get between 2.6 to 7.9 gallons of water per minute (dependant on the dosage level needed). This flow rate is achievable as long as the pressure in the closed pipe system is at least 14.5 PSI and does not exceed 72.5 PSI. Each cartridge can purify up to 237,000 gallons of water at 1ppm dosage level of chlorine and you can easily adjust the dosage level as needed in any situation.
Simply replace the cartridge when ppm decreases below required output to ensure safe water every time.
The Aquatabs InLine is used around the world for:
- All closed water systems
- Boreholes
- Attic and ground tanks
- Community water points
- Schools
- Small Medical Centres
- Private wells & group water schemes
- Water Kiosks
- Hospitals
The Aquatabs InLine Water Purification System is an innovative system for disinfecting water at point of entry with no power required and works on the flow of the water. Water is forced down through a cartridge and around the tablets, which dissolve to mix the required level of chlorine into the water line. The tablets are slow dissolving and are therefore perfect for continuous water disinfection.
Assisting in the control of biofilm build up the Aquatabs InLine prevents the re-establishment of the exopolysaccarides (EPS) matrix which is bearing the biofilm. Additionally, it helps with the control of calcium deposits at nipple drinkers and pipes. The Aquatabs InLine also kills microorganisms, like viruses and bacteria, in your water ensuring that Legionella is eliminated.
The Aquatabs InLine is great for the continuous and automatic dosing of water at point of entry into a tank or in-line for gravity, open and or pressurized water systems. You will get between 2.6 to 7.9 gallons of water per minute (dependant on the dosage level needed). This flow rate is achievable as long as the pressure in the closed pipe system is at least 14.5 PSI and does not exceed 72.5 PSI. Each cartridge can purify up to 237,000 gallons of water at 1ppm dosage level of chlorine and you can easily adjust the dosage level as needed in any situation.
Simply replace the cartridge when ppm decreases below required output to ensure safe water every time.
The Aquatabs InLine is used around the world for:
- All closed water systems
- Boreholes
- Attic and ground tanks
- Community water points
- Schools
- Small Medical Centres
- Private wells & group water schemes
- Water Kiosks
- Hospitals
- The kit comes with an Aquatabs InLine housing unit & replaceable cartridge.
- No electricity needed, just incorporate into gravity fed or pressured systems already in use.
- Water is treated as it flows through the system at 2.6 to 7.9 gallons per minute.
- Provides up to 237,000 gallons of clean and safe water per cartridge at a 1PPM dosage level of chlorine.
- Automatic dosing, with the seamless integration and eroding with the flow of water, there is no need to remember the exact dose when working with a large amount of water.
Safe drinking water
Kill bacteria, viruses and microorganisms such as Legionella especially in water tanks and piping where water is stored for long periods.
Safe drinking water
Kill bacteria, viruses and microorganisms such as Legionella especially in water tanks and piping where water is stored for long periods.
How To Use Aquatabs InLine
For any fresh water above 40°F (4°C)
Pre-Filter
Prior to use, remove all suspended material by filtering the water before it enters your gravity or pressurized system.
Connect InLine
Attach the Aquatabs InLine to the existing pipes of your gravity fed or pressurized system as per the instructions leaflet.
Flush System
Flush the system by following the instructions leaflet.
Adjust Flow Rate
Adjust the system flow rate/pressure by referring the instructions leaflet.
Drink
The treated water is now ready for drinking.
Pre-Filter
Prior to use, remove all suspended material by filtering the water before it enters your gravity or pressurized system.
Connect InLine
Attach the Aquatabs InLine to the existing pipes of your gravity fed or pressurized system as per the instructions leaflet.
Flush System
Flush the system by following the instructions leaflet.
Adjust Flow Rate
Adjust the system flow rate/pressure by referring the instructions leaflet.
Drink
The treated water is now ready for drinking.
Related Products
